AV25-2 NET Series Owner’s Manual June 2012 www.stewartaudio.com AV25-2 NET+AV25-2 NET
Q: What submap channels do the AV25-2 NET+ use? A: Since the AV25-2 NET+ is a 2-channel device, only the rst two sub-map channels are valid (channels
3.4 Remote Volume Control (NET+ Models Only) AV25-2 NET+ ampliers can have their volume remotely controlled (or muted) via the Euro Block input on t
5 Technical Specications Maximum Output 30Hz - 20kHz Stereo 25W @ 8Ω per channel 35W @ 4Ω per channel Frequency Response (+0, -3 dB) 30Hz-20kH
6.2.1 Return Authorization Number All returns to the factory for service must be accompanied by a Return Authorization (RA) number. One can be obtaine
8 Notes For Your Record In the spaces provided below, record the model and serial number located at the rear of your amplier. Ret
Important Safety Instructions Before using your Stewart Audio Inc. Power Amplier, please read this Owner’s Manual carefully to ensure optimum troubl
Table of Contents 1 Welcome Congratulations on the purchase of your new Stewart Audio AV Series power amplier. This amplier has been designed a
2 Setup 2.1 Setup Precautions CAUTION: Before installing your amplier, make sure that you have read the Important Safety Precautions at the be-gin
2.2.3 Product Dimensions 2.3 Proper Cooling Considerations Because the AV25-2 NET+ regulates its temperature using convection cooling and no fans, th
2.4.2 Unbalanced Input Connections When using an unbalanced input source and connector, a jumper must be added between the negative (-) terminals and
2.5 Output Connections Stewart Audio recommends using high-quality, heavy-gauge speaker wire and connectors to send the output signal of your amplier
3.2 Controls, Indicators, and Connectors AV25-2 NET+PRIORITYCOBRANET#2 Speaker #1- + - +- +PWR+10VRVCGNDMUTERVC#2 LINE OUT #1#2 LOCAL IN #
3.2.1 Indicators The AV25-2 NET series has up to 4 rear panel LED indicators. The rst is the power indicator which will illuminate when power is sup
Kommentare zu diesen Handbüchern