Owner’s Manual AV25-2 RS232 www.stewartaudio.com January 2012 AV25-2-RS232
6 Technical Specications Maximum Output 30Hz - 20kHz Stereo 25W @ 8Ω per channel 35W @ 4Ω per channel Frequency Response (+0, -3 dB) 30Hz-20kH
7 Warranty Information 7.1 Warranty Summary All Stewart Audio ampliers and accessories, unless excluded in this summary, are covered by a 3-year l
7.2.3 Packaging Instructions (cont.) 1. Please write the RA number on three sides of the box. Include the Stewart Audio RA number inside the box an
Important Safety Instructions Before using your Stewart Audio Inc. Power Amplier, please read this Owner’s Manual carefully to ensure optimum troubl
Table of Contents 1 Welcome Congratulations on the purchase of your new Stewart Audio AV Series power amplier. This amplier has been designed a
2 Setup 2.1 Setup Precautions CAUTION: Before installing your amplier, make sure that you have read the Important Safety Precautions at the be-gin
2.2.3 Product Dimensions 2.3 Proper Cooling Considerations Because the AV25-2-RS232 regulates its temperature using convection cooling and no fans, t
2.4.2 Unbalanced Connections When using an unbalanced input source and connector, a jumper must be added between the negative (-) terminals and the g
3 Operation 3.1 Operating Precautions 1. Before use, your amplier must be congure for proper operation, including input and output wiring hookup.
3.2.1 Indicators The AV 25 has 4 rear panel LED indicators. The rst is the power indi-cator which will illuminate when power is supplied to the ampl
Command Names and Description Hex Command VOLUME_UP Increases the volume by 10% 0x02 0x76 0x75 0x03 VOLUME_DOWN Decreases the volume by 10% 0x02 0x76
Kommentare zu diesen Handbüchern